Free Skate Cover Tutorial

Today we are making a super cute skate cover! It can be made for any size skates, for todays tutorial we are using a child's skate. My little one received some skates from Santa this year and she needs a cute quilty cover! This is a GREAT place to practice a little Free Motion Quilting! Or even better, why not use some of the samples we made with Leah Day?


1. You could start with  2 sample sandwich's we made with Leah Day, or we can make our own small mini-quilts! I made my own, finishing with an 11 by 11.5 inch rectangle

2. Two old face cloths, dish rags, basically anything that will absorb water to line the skate cover to avoid rusting our blades.
3. Two pieces of elastic, about 12 inch's long or more. Depending on the size of skate you are using.

Lets Get Started!

1 . If you are starting with  2 practise sandwich's, skip this part and go to "Attaching the towel" portion.

If you are starting fresh you will want to either find a scrap of material that is a couple inch's longer than your skate blade and fairly wide. For example, for a childs skate (size 8) I used an 11 by 11.5 inch rectangle. For a more "quilty" look, why not find some strips in your stash and make your own rectangle?

Here is my example;

I then lined these pieces with a large scrap of fabric. I did this by finding a piece of material slightly larger than my pieced rectangle and stitched it right sides together. I then flip it inside out and press. If you would like, you could make a quilt sandwich in the traditional way, with batting. This is up to you, I chose not to because my daughters skates are not that sharp or large, keep in mind though that adding the batting will provide extra protection for the blades. This is what makes the quilt sandwich samples with Leah Day so great! 

2.  Towel Lining

Now it is time to attach the towel to the inside of your square/rectangle quilt sandwich we have just made. 
You will need to find a towel scrap slightly smaller than your quilt sandwich. An inch smaller all around is ideal for this step. 

I used some old facecloths I had made to practise some embroidery work from a few years ago. I cut them down and made sure there was some space all around the towel. Sew the towel down to the lining (or wrong side of our quilt sandwich) just stitching along the edge the entire way around.

3. Quilting the Skate cover.

You can now quilt your quilt sandwich with the towel attached. If you are using an already quilted- piece, why not echo quilt what you have quilted previously? Or maybe you could try to travel stitch and mimic some of your quilting lines?

If you are like my sample here and it has no quilting, this is a great place to experiment with some designs you wanted to try. When quilting, I placed the towel side down, I found this worked better so that the needle did not get hooked into the towel loops. If you do not like free motion quilting, you could simply quilt some lines accross. This is basically just to keep the towel in place.

4. Fold your quilted rectangle in half, right sides together. Sew along the edges, this makes the envelope for the skate blade.

5. Attaching the elastic- Final step!

Now it is time to attach the elastic to the top edge of our skate cover. With the towel side out, Take the beginning of your elastic, place one pin and lock stitch. Now using your zig-zag stitch, gently pulling the elastic, sew all the way around.  Lock stitch when you get back to where your stitching started. If you can remove the bottom of your sewing machine (as if we were sewing a sleeve on a garment), that will help you sew continuously around the skate cover.

You can now turn your skate cover right side out and slip over your skate!!